I would have taken chicken shit in the chest for a good angled picture. Where's your war face?

new stock came today. i like it. looks good. may switch back and forth between wood and this synthetic.

i looked again to see if it was chromed, but i'm not sure. i will have to look into the serial to see when and where it was made i think to figure it out. it's tough to see.

http://aycu19.webshots.com/image/23378/ ... 719_rs.jpg

http://aycu36.webshots.com/image/22075/ ... 106_rs.jpg

That's the Tapco stock, isn't it? I can put the same stock on mine ONLY after meeting federal law 922r. I'd have to replace some of the "imported" parts on the rifle with parts made in the U.S. to make it a "U.S. built" rifle. The Tapco stock w/pistol grip counts as 3 parts. Depending upon which SKS you have would determine how many parts would have to be replaced in order to make it legal. Crazy right?

As of now, i also have a Tapco stock (black) and i'm getting that F/P and a new mag. That would add up to 7 "U.S. made" parts. I'll still need a few more to make it legal. My stock is sitting in the package which is right behind me. rolleyes:

yeah i know i've read about your 10 parts law. totally gay. i guess thats one advantage i have here in canada. didn't have to change out any parts at all.

yeah its the tapco t6 stock.

lol. every SKS has a tapco stock on it happy:

[quote="Simo Häyhä":12255]lol. every SKS has a tapco stock on it happy:[/quote:12255]

S othat makes it a stock stock??
biggrin:

i love this poster:

[img]http://olegvolk.net/gallery/d/5278-2/betterthan911.jpg[/img]

got some ammo today.

500 rounds of .303
and
500 rounds of 7.62x39

od crate is my 7.62x54r probably about 650 rounds in there.

[img]http://aycu34.webshots.com/image/25873/2001692870070435318_rs.jpg[/img]

SKS with some ammo:

[img]http://aycu34.webshots.com/image/22793/2001686709140064607_rs.jpg[/img]

Going to the range tomorrow and taking the SKS and Mosin. Hopefully i fixed the mosin sticky bolt syndrome. cleaned out the chamber real good of cosmo and put some lubrication on the rounds for when they extract. thats why those rounds are grey in the one pic.

i cured my sticky bolt by leaving the m91/30 in the car during a hot day, all the grease dripped out into a newspaper on my dash. seemed to work well.

i think i'm gonna have to stick the barrel in th eoven or something cause i shot 8 rounds out of the nagant at the range before i said screw it. once the barrel warms up it's a bitch to get those rounds out. or maybe i should try to find a place that makes new 7.62x54r if they still do.

the sks was great though. only put about 60 rounds through her, but she fired like a champ. no slam fires, misfeeds, jams, no nothin. it's a lot of fun to shoot.

and i just found out that my no4 mk2 is waiting for me at home!

[img]http://img72.imageshack.us/img72/2803/akrme1.jpg[/img]


AK-47 : "When you absolutely positively got to kill every mutha fucka in da room............"



It's got company now.

[img]http://img413.imageshack.us/img413/2386/akstw7.jpg[/img]

nice man. a friend of mine who just got back from basic at ft. benning has an ak-47. he recently bought an m4 from a pawn shop. i haven't seen it yet, but it sounds sweet

looks like a WASR10 not an AK

[quote="Simo Häyhä":38cbd]looks like a WASR10 not an AK[/quote:38cbd]

Sure it's an AK......a cheap one but an AK none the less. The only thing i can comment on it so far is fit & finish. Not too shabby but i haven't treated the wood furniture yet. The mags fit pretty good with minimal wobble and the front sight doesn't appear to be canted. The big test would be feeding and ejecting. If there are problems, i should be able to sort them out but i don't foresee any. As you know, the prices of "higher" end AK's are through the roof and i can't see spending that kind of cash on a crudely built rifle. For the price of a Russian or Chinese AK, i could simply build a kickass AR. That's another reason i went with the Saiga. Now that rifle is built in Russia and the fit & finish is much better and it shot extremely well. I swapped out the rear stock to a "thumbhole" one. I may pick up another Saiga (at $249.00) and do the conversion so i can fit a pistol grip and regular AK mags.

The best part about most of the rifles we posted are the costs. You can get a Mosin, SKS, WASR, Saiga, Hi-point, Shotgun, for under $300. The price of ammo is going to exceed the weapons!!

8/1/07 update:

Just refinished the wood furniture on my AK. Also swapped out the pistol grip. The pic was taken with a shit camera but trust me, the rifle looks totally different now.

[img]http://img521.imageshack.us/img521/3540/akstockht6.jpg[/img]

Before i re-did the furniture, i took the rifle out and ran it hard. Was able to bump fire 4 shot groups through it. The handguards got awfully hot after running a few mags through it fast. The sights didn't even have to be touched. I was picking off empty shotgun shells from the shoulder at 25 yds. I bet if i bench fired it, i'd have a nice group at 100 yds.

AK's really look out of place with a sling and bayonet attached. eek:

M1 carbine for sale here @ 400 dollars

pics plz

[quote="Xorcist [USA]":7de4c]pics plz[/quote:7de4c]

[img]http://www.partybox.co.uk/data/images/peashooter.jpg[/img]

Dude how much was that SKS with that furniture? Also did you paint that stock yourself?

anyone know much about the L42A1? all i know is that they use the 7.62 NATO as opposed to the .303

if you've got a hard on for enfields then the Lee-Enfield 2a uses 7.62 and a 12 round magazine. Produced by the ishapore factory in india. good rifle, can pick them up for about 200 at a gunshow.

i was just wondering if they were any different in feel than the enfield. i figured they'd be quite similar since it was designed similar to the enfield. i love the 2a though happy:

you can get the tapco stock from here for $80.

http://www.gunaccessories.com/ati/SKSAc ... /index.asp

Stock comes in a variety of colours. check the site. Only reason I bought from them is they were the only guys who shipped to canada. You may be able to find for cheaper somewhere else. I don't think there is a tapco dealer in canada so i had no choice.

Where did you get the SKS?

bought if off a member at:

http://www.canadiangunnutz.com/forum/index.php

This should be your new avatar, ninty: http://www.canadiangunnutz.com/forum/images/logo.gif

I concur......nice avatar Zone.

discovery channel - future weapons

hk-416. amazing

[img]http://images.military.com/pics/SoldierTech_HK416-1.jpg[/img]

thats the one where he takes it out of sand and starts shooting and with water and shit right?

thats the one rock:

Yeah HK416 and 417 are my dream rifles. They are uber expensive, but so fucking sexy

I want this though

[img]http://www.magpul.com/images/gallery/masada/big/masada1.jpg[/img]

Magpul Masada

I really really want to build one of these though.

[img]http://securityarms.com/sale/sage/WebPages/deserttancqb.jpg[/img]

It requires 1 Springfield M14 SOCOM:

[img]http://www.capoliceequip.com/images/spgSOCOM16.JPG[/img]

and 1 Sage EBR kit

[img]http://securityarms.com/sale/sage/WebPages/m4cvlarge.jpg[/img]

Estimated total on rifle $2300 eek: eek: eek: eek: eek: eek:

Shit aint cheap eh?

Any interest in an AK? Went upstate this past weekend to pick up a new "unissued SKS" and my friend picked up an AK. We shot the shit out of the AK and were doing mag dumps whilst bump-firing. Holy shit talk about fun.....30 rounds of full auto !!

Eh not a big AK fan, i really want to save up for an AR15, but I may just save and get the Springfield SOCOM M14

http://www.youtube.com/watch?v=socgmULGVOA

M14 EBR silenced, fucking awesome



[img]http://media.militaryphotos.net/photos/albums/cavtroop4/aaa.sized.jpg[/img]

Pay no attention to the azn...rifle is so sexy

[img]http://img297.imageshack.us/img297/7894/garand3ty8.jpg[/img]

[img]http://img297.imageshack.us/img297/1608/garand4go3.jpg[/img]

rock:

^^...yours?

FN FAL is still my angel

Fathers, which will be mine

Jealous! That would be my first purchase, if I was in the market for a rifle. Love the Garand.

Like to have an M1 Carbine too.

So we took the M1 shooting, and that thing kicks like a mule. Fucking hurt my shoulder, thats what you get for not putting it in your shoulder hard enough, im use to the M16 where you barley feel the recoil effects.


Anyway anyone have any idea where to order complete lower recievers for M16's on the internet?

My ultimate goal is to build a MK12 SPR

http://i27.photobucket.com/albums/c1...9/DSC02485.jpg

Or a collapsible stock, not sure what yet, the full stock or the collapsible

http://photos.imageevent.com/smglee/mstn/DSCN2244.jpg