Alliedassault

Alliedassault (alliedassault.us/index.php)
-   MoH General Discussion (alliedassault.us/forumdisplay.php?f=7)
-   -   Fire Wall problems (alliedassault.us/showthread.php?t=11252)

FSSF_SNUFFY 10-27-2002 04:34 PM

Fire Wall problems
 
I just hooked up a gvc router and was wondering if someone could help me configure it. I have 2 computers and I want to run a RW base station and host a small MOHAA server. When I host a RW channel I cannt find the channel with the other comp so the fire wall is causing grief. I assume that when I go to host a MOHAA server the same will happen. If someone can help that would be great I cannt find any reasources on the net.

Snuffy

rudedog 10-27-2002 05:01 PM

OK, not too familiar with your type of router but the basics to get your started.

You will need to forward your MOH port (default 12203) to the computer running the MOH server
Same with RW, you will need to forward the RW port to the computer running the RW base station software.

If you want your box to show up on ASE or GS then you will need to forward all the other ports.

Do a search on "dogmeat ports" to get the complete list of ports.

Depending on your router, you may have to allow outgoing ports as well.
Check with your routers web site for more info on exactly how to forward incoming and outgoing ports

Good luck

FSSF_SNUFFY 10-28-2002 11:59 AM

dogmeat
 
I cannt find dogmeat ports on the net where can I find all the ports needed


Snuffy

SNYPE00 10-28-2002 01:35 PM

Heres the link to the port guide:
http://www.mohadmin.com/nuke/modules.ph ... age&pid=13

FSSF_SNUFFY 10-28-2002 03:53 PM

Thx but I am still messed up
 
I got all the ports and opened them on the router but I still cannt get this to work. When I try to host a RW base station it uses my internal IP addy and it isnt visible to the outside world. I can connect to the channel with my other computer. I was using a hub before and it worked but I had 2 different internet IPS. I am totally confused please help.

*** I figured out how to get peeps to join the channel but it is not visible on the channel search in RW please help me***

Snuffy

rudedog 10-28-2002 05:34 PM

here is a link for people having the same problem you have with RW.

http://pub50.ezboard.com/fbemlmessagebo ... D=37.topic

most of them switched over to Teamspeak because it's easier to use with a router.

Check out http://www.teamspeak.org for more info Jasper is our TS guru


All times are GMT -6. The time now is 05:59 AM.

Powered by vBulletin® Version 3.8.12 by ScriptzBin
Copyright ©2000 - 2025, vBulletin Solutions Inc.
© 1998 - 2007 by Rudedog Productions | All trademarks used are properties of their respective owners. All rights reserved.