Bump.

<BLOCKQUOTE><font size="1" face="Tahoma, Verdana, Arial">quote:</font><HR>Originally posted by First Man Down v2.0:
FuBarGrn, I have that enabled.

Inforit, I do have a PCI card, which I mentioned. My Dell is a Dimension L series (el cheapo) and doesn't have any AGP slots.<HR></BLOCKQUOTE>

First Man Down no more warez crap from you okay? Other than that, welcome back?

[This message has been edited by BadScript (edited January 29, 2002).]

Yeah, cheers, mate - mum's the word. Sorry to sort of sneak back in like that, but could you do me a favor and give me back my old username? I'm not fond of the v2.0 at the end.

Here's my system specs:

Dell P3 733MHz
256MB PC-100 RAM
GeForce2 MX 400 64MB SDR PCI (w/ latest drivers)
7200RPM 20GB Maxtor HDD
Sound Blaster Live! Value
Windows XP Pro

My virtual memory is set at 512MB, and this helped performance dramatically. It was set at 381MB.

Currently the game is running at anywhere from 10 - 100FPS, and usually runs at 30FPS. I turned off anti-aliasing in the videocard's properties as well as turned off all shadows within the game and both helped the performance, but I'm still not satisfied. My PC usually has no problem running games with settings at max. - RTCW ran flawlessly with all setting set to their max. There was virtually no choppiness and the graphics were sharp and rich.

I am currently running MOHAA in 1024 x 768 with all settings on max, except shadows, which are turned off. I have color depth set at 16-bit and texture depth at 16-bit. (I've noticed very little, if any, visual difference with those turned down, but got a huge boost in performance.)

Under Direct3D Settings the PCI Texture Memory Size is set at the default 31MB of system memory. I can go to a maximum of 127MB. And under OpenGL Settings, 5MB of system memory is set, which is default. I can go to a maximum of 16MB.

My question to those who know: Should I alter these default values? They seem low and I really haven't tweaked my videocard's settings other than to turn on fast linear-mipmap-linear filtering.

Any help in the right direction is greatly appreciated. Thanks for your time.

[This message has been edited by First Man Down v2.0 (edited January 29, 2002).]

Have you tried the Texture-Compression yet??

I heard that it was SUPPOSED to boost FPS's across the board........

------------------
2nd SS Panzer Division
http://www.geocities.com/moh_2ss/
PAIN GOES AWAY,CHICS DIG SCARS,BUT GLORY LASTS FOREVER
http://dba.gamepoint.net/images/klaus.jpg

Well for one, I am assuming you have a AGP card so increasing the pci memory will not do anything, I would recommend taking that down to 0 for opengl and direct3d.

FuBarGrn, I have that enabled.

Inforit, I do have a PCI card, which I mentioned. My Dell is a Dimension L series (el cheapo) and doesn't have any AGP slots.