|
06-16-2003, 10:18 AM
make sure your bus speed is set correctly..if you built it usually the bus speed is at a lower setting out of the box...check your MOBO's manual and see what the correct bus speed is for your CPU..its probably set at 100 mhz(which is the default) when it should be set at 133 if its a 266MHx bus or 166 if its a 333mhz bus to change it you might have to either change a setting in bios(if its a good board) or it might suX0r like mine and have a switch on the board..take a look in the manual and find out
|