[geRV]

calmdown:

[Akuma]

Originally Posted by geRV

[img]http://homepage.ntlworld.com/gerald.marley/New%20Folder/8mb.jpg[/img]

happy:

Are you running the patched version that gives the prescotts an inflated score or the real one that all the benchmarkers use?

[geRV]

Originally Posted by Akuma

Are you running the patched version that gives the prescotts an inflated score or the real one that all the benchmarkers use?

Ive read about a patched version never tried it thats the proper one. Got this posting at 4.2ghz, i think with some new ram it would be cpable of it, my pwm temps are oOo: though even with the heatsinks i added.

[Akuma]

Just add a low rpm 120mm or 92mm over your socket with rubber bands and twist ties. That will get your PWM temps way down.

What temps are you getting on that pressy while running super pi?

[geRV]

Originally Posted by Akuma

Just add a low rpm 120mm or 92mm over your socket with rubber bands and twist ties. That will get your PWM temps way down.

What temps are you getting on that pressy while running super pi?

Yeah i got one over it, just that pos hardware monitor keeps freaking out about it being too fast and turning it off. cuss: Disabled that crap now.

Running superpi its around 53c or so. Not as warm as i expected at 4ghz, people say the chip runs warm, to me its just the pwm components run warm, chips only a little hotter than the northwoods.

[Akuma]

Nice, my A64 runs 50c at load on air... No bad for a pressy at all. BTW, you beat me.


[img]http://24.58.170.36/upload/akumapimark1.jpg[/img]

[geRV]

Considering im running 1300 intelhertz ( biggrin: ) faster there wasn't really too much in it.

[Innoxx]

You guys are geeks.

[geRV]

loney:

/phones canadian immigration authorities. the_finger:

[Akuma]

Originally Posted by Innoxx

You guys are geeks.

lick my eyeball

[9mm BeRetTa]

beat this stuff gerv: http://www.xtremesystems.org/forums/sho ... hp?t=44785

6.3ghz.....with this:Intel P4 3.6Ghz SL7Q2 -113c
DFI 875P-T @ 333FSB
Centon Advanced DDR TCCD
OCZ DDR Booster
Chilly1 three stage CPU cascade

Don't know what it all means, but must be good.

[geRV]

Phase change cooling, basically the pc's layed out on a table in pieces being cooled by compressors and a liquid that turns to gas form to cool the cpu to sub zero temperatures.

Its those kind of systems that are just clocked for benchmarks and nothing more. Id be suprised if it could stay on for more than a few hours before becoming unstable.

[Coleman]

Originally Posted by geRV

Id be suprised if it could stay on for more than a few hours before becoming unstable.

ha

[geRV]

http://www.extremecooling.net/index/request.php?5

^ right click save trarget as, thats a pc being cooled by dry ice.

[Akuma]

Originally Posted by geRV

Phase change cooling, basically the pc's layed out on a table in pieces being cooled by compressors and a liquid that turns to gas form to cool the cpu to sub zero temperatures.

Its those kind of systems that are just clocked for benchmarks and nothing more. Id be suprised if it could stay on for more than a few hours before becoming unstable.

Most likely no more than a few seconds. They are designed to work once to get a really high benchmark. A lot of times the whole machine dies after a single run.