[quote=SillyGoose]
Quote:
Originally Posted by "ST_Bazooka_Joe":79d47
1) P4 1300mhz - This can be upgraded. Most likely, the CPU slot is the older 478 which only runs at 400mhz FSB. The newer slot, 423, runs at 533mhz FSB, and uses a different processor chip. I would suggest a new motherboard, either by Asus, Intel, or ABit, that has a 533FSB/Socket 423 P4 slot, and get a P4 chip of about 2Ghrz. The standard today is about 2.2Ghrz, so whichever you want. The highest is 3.06, but thats $700. For about $250, you can get a 2.5Ghrz chip.
|
Bazooka I agree with you completely, except for one little problem, he has a DELL. So if he was to buy a new mobo he would have to get a new case and powerunit. IN my opinoin if you have to get a new mobo go the AMD route with an Asus A7N8X mobo and an Athlon 2400+. Then again I am an AMD whore evil:[/quote:79d47]
Right you are, unless Dell would be cool as hell and send him a standard ATX Boiler plate for the case. And if he has a P4 already, he must have a P4-compliant, at least 300W power supply. So he might get lucky.