Tiki files question
 

I often have problems with my video card and frame rates, but one time I went onto a server and found my gun, the fire bursts, and sound from the STG was gone! But I could still shot and it was great! I removed the gun through the MOHAA options, but I want to remove the first bursts and bullet shells from the screen as well. I was told to go into the tiki files and remove them. But I have never done so before. All I know if to get the pakscape program to open the paks. But I don't know which to open and what to do inside. Can anyone give me direction on how to remove the fire bursts and shells from the STG, BAR, and Thompson weapons? I would greatly appreciate it!! angel:

did u d/l any mods??

Give me your email address and I will send the mod over.

Actually, someone helped me with this by using pakscape and going into
pak0.pk3
/models/fx

muzflash.tik
muzflash_bar.tik
mg42_sideflash.tik

then changed the values to 0. But now I have a new problem that I hope someone with experience can help me with.

Whenever I change the scale in the tik files, save, close, then save pakscape. But when I return to the pak or enter a game, the bursts are back and the scale values of .52 are reverted back to the originals (instead of 0). Can anyone recommend a way of keeping the values at 0?

BTW, my email is regentscc@go.com

Ok, nevermind what I wrote above...this is my problem now.

I wrote this into the tik file...
TIKI
setup
{
scale 0.00
path models/fx/muzflash
skelmodel mg42_sideflash.skd
surface material1 shader mg42_sideflash
surface material2 shader mg42_starflash
}

animations
{
idle mg42_sideflash.skc
}
but I still see the fire burst. I saved pakscape and the file, but when I arrive on a server, the fire bursts from the gun are still visible. Any suggestions?

i think u need to reinstall your game

Ranny, you don't know what you are talking about.

Plantage, file has been sent to that email. Enjoy.

mpowell is the man biggrin:

Thanks, MPowell1944...I greatly appreciate it!!

No problem. freak: