[Bane]

A shot in the dark but here goes:

AutoCAD 2002 runs fine in 2D. In 3D I get the same errors over and over and over...every two to three commands or so. It usually happens during the PAN command. Needless to say it's shooting my productivity straight to hell. mad:

The errors are:

FATAL ERROR: Unhandled Access Violation Writing 0x0007 Exception at 7800cb6ah

followed by:

The instruction at "0x5f401351" referenced memory at 0x00000004". The memory could not be "read". Click OK to terminate the application.

acadstk.dmp file:

[Main]
DumpEntries=2
[AcadCrashDump1]
ExeTimeDateStamp=0x3AE3DE35
CrashTimeDateStamp=0x3DC6BA5E
acadVer=15.06
WinVer=0x5650004
DumpType=Exception
ExceptionCode=0xC0000005
ExceptionFlags=0x0
ExceptionAddress=0x7800CB6A
NumberParameters=0x2
ExceptionInformation0=0x1
ExceptionInformation1=0xAC
ContextFlags=0x1001F
SegGs=0x0
SegFs=0x3B
SegEs=0x23
SegDs=0x23
Edi=0x0
Esi=0x69470CC
Ebx=0x33104168
Edx=0xA8
Ecx=0x256
Eax=0x509D558
Ebp=0x596F728
Eip=0x7800CB6A
SegCs=0x1B
EFlags=0x10206
Esp=0x596F70C
SegSs=0x23
ReferenceAddr=0x91D7C4
ReferenceName=_WinMain@16
StackWalk0=7800C6CD,BB6A,1,SymExport,set_sbh_thres hold+1CD,C:\WINNT\system32\MSVCRT.dll
StackWalk1=33012FE3,B6CD,1,SymExport,exception::wh at+121,C:\WINNT\system32\MSVCRT.dll
StackWalk2=4AFFC033,11FE3,1,SymExport,HD_ReleaseMe mory+143,E:\Program Files\AutoCAD 2002\heidi7.dll
[AcadCrashDump2]
ExeTimeDateStamp=0x3AE3DE35
CrashTimeDateStamp=0x3DC6BB5A
acadVer=15.06
WinVer=0x5650004
DumpType=Exception
ExceptionCode=0xC0000005
ExceptionFlags=0x0
ExceptionAddress=0x7800CB6A
NumberParameters=0x2
ExceptionInformation0=0x1
ExceptionInformation1=0x15
ContextFlags=0x1001F
SegGs=0x0
SegFs=0x3B
SegEs=0x23
SegDs=0x23
Edi=0xA
Esi=0x35A5A9C
Ebx=0x11
Edx=0x11
Ecx=0x401D4BF8
Eax=0x30CC7F8
Ebp=0x260F728
Eip=0x7800CB6A
SegCs=0x1B
EFlags=0x10202
Esp=0x260F70C
SegSs=0x23
ReferenceAddr=0x91D7C4
ReferenceName=_WinMain@16
StackWalk0=7800C6CD,BB6A,1,SymExport,set_sbh_thres hold+1CD,C:\WINNT\system32\MSVCRT.dll
StackWalk1=33012FE3,B6CD,1,SymExport,exception::wh at+121,C:\WINNT\system32\MSVCRT.dll
StackWalk2=4AFFC033,11FE3,1,SymExport,HD_ReleaseMe mory+143,E:\Program Files\AutoCAD 2002\heidi7.dll


Autodesk ( oOo: ) has been less than worthless in helping me resolve this issue. They're pissed because their Mickey Mouse CAD program is going the way of the typewriter. I'm thinking it's a conflict between the video card and the heidi drivers but who the hell knows.

So if you can help me I'd appreciate it. You guys/gals are my last hope.

[MrLevinstein]

I happen to like autodesk. i hate autocad its good for advanced technical drawing but 3d sucks

[Bane]

This is the BS I'm dealing with here:

FATAL ERROR: Unhandled Access Violation Writing 0x0007 Exception at 7800cb6ah

11/04/2002 at 13:36:12.635 Drawing: G:\694 - Holocaust Memorial\Drawings\COLUMNS - 3D.dwg
-------------


FATAL ERROR: Unhandled Access Violation Writing 0x00ac Exception at 7800cb6ah

11/04/2002 at 14:14:22.618 Drawing: G:\694 - Holocaust Memorial\Drawings\COLUMNS - 3D.dwg
-------------


FATAL ERROR: Unhandled Access Violation Writing 0x33183fde Exception at 7800cb6ah

11/04/2002 at 14:19:26.485 Drawing: G:\694 - Holocaust Memorial\Drawings\COLUMNS - 3D.dwg
-------------


FATAL ERROR: Unhandled Access Violation Writing 0x40ad6ad2 Exception at 7800cb6ah

11/04/2002 at 15:07:45.253 Drawing: G:\694 - Holocaust Memorial\Drawings\COLUMNS - 3D.dwg
-------------


FATAL ERROR: Unhandled Access Violation Writing 0x00ac Exception at 7800cb6ah

11/04/2002 at 15:44:32.487 Drawing: G:\694 - Holocaust Memorial\Drawings\COLUMNS - 3D.dwg
-------------

I started this model shortly after lunch today. Thank god it's only 15 minutes to quitin' time. I can't wait for tomorrow so I can get more FATAL ERRORS all day long! WOOHOO!!!

mad: mad: mad: mad: mad: